Polk Car Audio - PAD2000.2

Super-efficient Class D Bridgeable 2-channel Mobile Audio Amplifier


Sleek, Compact, Powerful, and Really Cool



The PA D2000.2 is capable of bridging a left and right terminal into a single full range channel with higher output power. For instance, the L-/R+ channels when wired correctly will increase the output power from 125W per channel to a 500W channel (for a 4 ohm load). The most common hookups are two full-range channels or a bridged subwoofer channel.



PAD2000.2 Features:

  • Super-efficient class D bridgeable design-runs cooler than conventional amps.
  • High-speed MOSFET switching power supply.
  • Toroidal transformers-help keep the amplifier's sleek design under 2 tall while ensuring plenty of clean, efficient power.
  • Protection-Thermal, DC offset, reverse DC voltage and short circuit protection.
  • FULL, HPF, BPF switch-selects full range, high pass filter, or band-pass filter for dialing in your crossover for the ideal speaker blending.
  • Adjustable low & high pass frequency range-enables you to fine tune the blending of your speakers in their frequency range overlap.
  • Level control-adjusts the gain of the left and right channels to match the output voltage from your head unit.
  • Line level inputs-accepts line level input from a head unit, preamplifier or, equalizer.
  • Line level outputs-provides a full range signal for easy connection to additional amplifiers.
  • Nickel-plated wire terminals & RCA connectors-ensure maximum signal transfer.
  • Stainless steel hardware-used throughout and will not corrode in humid environments.

  • Amplifier Power Specs RMS Power:
  • at 14.4V Watts per channel bridged - 4 ohms 500 watts
  • at 14.4V Watts per channel NOT bridged @ 1 kHz - 2 ohms 250 watts
  • at 14.4V Watts per channel NOT bridged @ 1 kHz - 4 ohms 125 watts
  • 12V & Ground Cable Gauge 4AWG
  • Channel Notes Bridgeable Class D MOSFET
  • Channels 2

  • Dimensions:
  • Product Weight (each): 3.75 pounds
  • Cabinet Dimensions - Depth: 6 3/4" (17.14cm)
  • Cabinet Dimensions - Height: 1 13/16" (4.60cm)
  • Cabinet Dimensions - Width: 8 1/4" (20.96cm)
  • Dimensions With Panels - Depth: 6 3/4" (17.14cm)
  • Dimensions With Panels - Height: 1 13/16" (4.60cm)
  • Dimensions With Panels - Width: 8 1/4" (20.96cm)

  • Electrical:
  • Distortion at Rated Power:
  • Effective Damping Factor: >100
  • Max Sensitivity: 200mV-6V dB
  • Minimum Impedance Bridged: 4 ohms
  • Minimum Impedance Not Bridged: 2 ohms
  • Protection Circuitry: Thermal, DC offset, reverse DC voltage and short circuit protection; two 25 amp ATC fuses
  • Signal-to-noise (Referenced to rated power): 105 dBA
  • Total Frequency Response: 20Hz-20kHz
  • High Pass Filter - Filter Frequency: 20Hz-4kHz
  • High Pass Filter - Filter Slope: 12dB/octave
  • Low Pass Filter - Filter Frequency: 50Hz-5kHz
  • Available in:
    Size: Sold as Singles

    MSRP: $380.00 CAD

    Super-efficient Class D Bridgeable 2-channel Mobile Audio Amplifier

    Click to enlarge